Find a Service Center
- 9.4" Maximum Diameter
- 4.7" Stroke Length
- 2" Compressed Height
- 3/4" Port Size
description
- Enidine Air Springs are highly durable, precisely engineered and cost effective for use in a wide variety of actuation and vibration isolation applications. With time-tested designs, fabric-reinforced Neoprene or Natural Rubber flex member construction and corrosion-protected end retainers, Enidine Air Springs provide superior quality and performance. As an actuator, Enidine Air Springs provide linear or angular motion. As an isolator, air springs are effective in reducing the harmful effects of vibration.
| Force @ 4 in Stroke | N/A |
| Force @ 8 in Stroke | N/A |
| Air Inlet Type | NPT |
| Convolutions | Single |
| Stroke Length [Max] | 3.200 in |
| Force @ Maximum Stroke (80 psi) | 1600 lbf |
| Pressure [Max] | 100 psi |
| Force @ 6 in Stroke | N/A |
| Force @ Stroke (80 psi) | 3100 lbf @ 1 in, 2700 lbf @ 2 in, 1900 lbf @ 3 in |
| Force @ 2 in Stroke | 2700 lbf |
| Force @ 5 in Stroke | N/A |
| Force @ 3 in Stroke | 1900 lbf |
| Temperature Range [Max] | 150 °F |
| Recommended Isolator Design Height [Max] | 6 1/2 in |
| Force @ 9 in Stroke | N/A |
| End Closure | Style 2 End Retainer |
| Style No. | YI-1B |
| Force @ 12 in Stroke | N/A |
| Air Inlet | 3/4 in |
| Temperature Range [Min] | -40 °F |
| Bumpers | w/o Bumpers |
| Force @ 1 in Stroke | 3100 lbf |
| Compressed Height | 2 in |
| Bellows Type | Single Convolution |
| Recommended Isolator Design Height [Min] | 4 in |
| Blind Tap Spacing | 2 3/4 in |
| End Plate Diameter | 5 in |
| Weight | 4.8 LB |
