Find a Service Center
Alternate Products
- 9.4" Maximum Diameter
- 4.7" Stroke Length
- 2" Compressed Height
- 1/4" Port Size
description
- Enidine Air Springs are highly durable, precisely engineered and cost effective for use in a wide variety of actuation and vibration isolation applications. With time-tested designs, fabric-reinforced Neoprene or Natural Rubber flex member construction and corrosion-protected end retainers, Enidine Air Springs provide superior quality and performance. As an actuator, Enidine Air Springs provide linear or angular motion. As an isolator, air springs are effective in reducing the harmful effects of vibration.
| Bellows Type | Single Convolution |
| Air Inlet | 1/4 in |
| Recommended Isolator Design Height [Max] | 6 1/2 in |
| Force @ 5 in Stroke | N/A |
| Force @ 9 in Stroke | N/A |
| Force @ 6 in Stroke | N/A |
| Force @ 1 in Stroke | 3100 lbf |
| Air Inlet Type | NPT |
| End Closure | Style 2 End Retainer |
| Force @ 2 in Stroke | 2700 lbf |
| Force @ Maximum Stroke (80 psi) | 1600 lbf |
| Temperature Range [Max] | 150 °F |
| Force @ 8 in Stroke | N/A |
| Force @ Stroke (80 psi) | 3100 lbf @ 1 in, 2700 lbf @ 2 in, 1900 lbf @ 3 in |
| Style No. | YI-1B |
| Force @ 12 in Stroke | N/A |
| Blind Tap Spacing | 2 3/4 in |
| Pressure [Max] | 100 psi |
| Convolutions | Single |
| Recommended Isolator Design Height [Min] | 4 in |
| Force @ 3 in Stroke | 1900 lbf |
| Stroke Length [Max] | 3.200 in |
| End Plate Diameter | 5 in |
| Compressed Height | 2 in |
| Temperature Range [Min] | -40 °F |
| Force @ 4 in Stroke | N/A |
| Bumpers | w/o Bumpers |
| Weight | 4.8 LB |
