Find a Service Center
- 7.7" Maximum Diameter
- 3.8" Stroke Length
- 7.7" Compressed Height
- 1/4" Port Size
- Machined Aluminum Retaining End Plates
description
- Enidine Air Springs are highly durable, precisely engineered and cost effective for use in a wide variety of actuation and vibration isolation applications. With time-tested designs, fabric-reinforced Neoprene or Natural Rubber flex member construction and corrosion-protected end retainers, Enidine Air Springs provide superior quality and performance. As an actuator, Enidine Air Springs provide linear or angular motion. As an isolator, air springs are effective in reducing the harmful effects of vibration.
features
- Temperature range from -40 °F to 150 °F
- Manufactured by Goodyear
- Provides linear and angular motion
- Provides angular motion
- Maximum inflation pressure 100 psi
- Little space required
- No sealing required
- Maximum tilt angle of 25°
| Force @ 6 in Stroke | N/A |
| Force @ 12 in Stroke | N/A |
| Force @ Stroke (80 psi) | 1350 lbf @ 3 in, 2500 lbf @ 1 in, 2500 lbf @ 2 in |
| Temperature Range [Min] | -40 °F |
| Recommended Isolator Design Height [Max] | 5 in |
| Style No. | YI-1B |
| Blind Tap Spacing | 2 3/4 in |
| Bellows Type | Single Convolution |
| Bumpers | w/o Bumpers |
| Force @ 1 in Stroke | 2500 lbf |
| Temperature Range [Max] | 150 °F |
| Force @ 2 in Stroke | 2500 lbf |
| End Closure | Style 2 End Retainer |
| Air Inlet | 1/4 in |
| End Plate Diameter | 4.15 in |
| Force @ 3 in Stroke | 1350 lbf |
| Force @ 5 in Stroke | N/A |
| Force @ Maximum Stroke (80 psi) | 450 lbf |
| Pressure [Max] | 100 psi |
| Compressed Height | 1.8 in |
| Stroke Length [Max] | 3.800 in |
| Recommended Isolator Design Height [Min] | 4 in |
| Force @ 4 in Stroke | N/A |
| Air Inlet Type | NPT |
| Force @ 8 in Stroke | N/A |
| Force @ 9 in Stroke | N/A |
| Convolutions | Single |
| Weight | 2.85 LB |
