Find a Service Center
- 6 1/2" Maximum Diameter
- 4" Stroke Length
- 1.8" Compressed Height
- 3/4" Port Size
description
- Enidine Air Springs are highly durable, precisely engineered and cost effective for use in a wide variety of actuation and vibration isolation applications. With time-tested designs, fabric-reinforced Neoprene or Natural Rubber flex member construction and corrosion-protected end retainers, Enidine Air Springs provide superior quality and performance. As an actuator, Enidine Air Springs provide linear or angular motion. As an isolator, air springs are effective in reducing the harmful effects of vibration.
| Force @ 12 in Stroke | N/A |
| Blind Tap Spacing | 1 3/4 in |
| Force @ Stroke (80 psi) | 1500 lbf @ 1 in, 1150 lbf @ 2 in, 440 lbf @ 3 in |
| Stroke Length [Max] | 3 in |
| Convolutions | Single |
| Air Inlet Type | NPT |
| Force @ 5 in Stroke | N/A |
| Temperature Range [Max] | 150 °F |
| Bumpers | w/o Bumpers |
| Style No. | YI-1B |
| Recommended Isolator Design Height [Min] | 3 1/2 in |
| Force @ Maximum Stroke (80 psi) | 440 lbf |
| Force @ 6 in Stroke | N/A |
| Force @ 9 in Stroke | N/A |
| Air Inlet | 3/4 in |
| Force @ 1 in Stroke | 1500 lbf |
| End Closure | Style 2 End Retainer |
| Compressed Height | 1.8 in |
| Temperature Range [Min] | -40 °F |
| Force @ 3 in Stroke | 440 lbf |
| Force @ 4 in Stroke | 1500 lbf |
| Recommended Isolator Design Height [Max] | 5 in |
| Bellows Type | Single Convolution |
| Force @ 8 in Stroke | N/A |
| End Plate Diameter | 3.4 in |
| Force @ 2 in Stroke | 1150 lbf |
| Pressure [Max] | 100 psi |
| Weight | 1.4 LB |
