Find a Service Center
- 6" Maximum Diameter
- 3" Stroke Length
- 1.8" Compressed Height
- 3/4" Port Size
description
- Enidine Air Springs are highly durable, precisely engineered and cost effective for use in a wide variety of actuation and vibration isolation applications. With time-tested designs, fabric-reinforced Neoprene or Natural Rubber flex member construction and corrosion-protected end retainers, Enidine Air Springs provide superior quality and performance. As an actuator, Enidine Air Springs provide linear or angular motion. As an isolator, air springs are effective in reducing the harmful effects of vibration.
| Force @ 3 in Stroke | 520 lbf |
| Force @ Maximum Stroke (80 psi) | 520 lbf |
| Temperature Range [Min] | -40 °F |
| Force @ 4 in Stroke | N/A |
| Force @ 1 in Stroke | 1500 lbf |
| End Closure | Style 2 End Retainer |
| Force @ 12 in Stroke | N/A |
| End Plate Diameter | 3.4 in |
| Temperature Range [Max] | 150 °F |
| Recommended Isolator Design Height [Min] | 2 1/2 in |
| Compressed Height | 1.8 in |
| Bellows Type | Single Convolution |
| Force @ 5 in Stroke | N/A |
| Force @ 8 in Stroke | N/A |
| Air Inlet Type | NPT |
| Stroke Length [Max] | 3 in |
| Force @ 2 in Stroke | 1200 lbf |
| Convolutions | Single |
| Blind Tap Spacing | 1 3/4 in |
| Pressure [Max] | 100 psi |
| Style No. | YI-1B |
| Force @ Stroke (80 psi) | 1500 lbf @ 1 in, 1500 lbf @ 2 in, 500 lbf @ 3 in |
| Force @ 9 in Stroke | N/A |
| Air Inlet | 3/4 in |
| Force @ 6 in Stroke | N/A |
| Recommended Isolator Design Height [Max] | 4 in |
| Bumpers | w/o Bumpers |
| Weight | 1.2 LB |
