Find a Service Center
- 3/8" Pitch
- L Belt Type
- 3/4" Belt Width
- 30 Teeth
- 3.581" Pitch Diameter
features
- Nonslip
- No lubrication required
- Minimum backlash
- Constant speed
caution
- When the drive is operated on other than horizontal shafts, or when the center distance is greater than eight times the diameter of the smaller pulley on drive ratios less than 3:1, both pulleys should be flanged
- When a drive has three pulleys, at least two should be flanged
- If the drive has more than three pulleys, every other pulley should be flanged
- It is necessary to use a minimum of one flanged pulley to prevent the belt from riding off
| Outside Dia. | 3.551 in |
| Bore Range [Max] | 1.625 in |
| Belt Pitch | 0.375 in |
| Length Through Bore | 1 in |
| Type | KF-1 |
| Bushing Type | Taperlock |
| Bore Range [Min] | 0.5 in |
| Finished Bore | N/A |
| Bore Type | Taper-Lock and QD Bushed |
| Belt Width | 0.75 in |
| Bushing Series | 1610 |
| No. of Teeth | 30 |
| Belt Size | L |
| Pitch Diameter | 3.581 in |
| Hub Dia. | N/A |
| Weight | 1.5 LB |
| EAN or UPC | 782475088157 |
