Find a Service Center
- 1/2" Pitch
- H Belt Type
- 1" Belt Width
- 26 Teeth
- 4.138" Pitch Diameter
features
- Nonslip
- No lubrication required
- Minimum backlash
- Constant speed
caution
- It is necessary to use a minimum of one flanged pulley to prevent the belt from riding off
- When the drive is operated on other than horizontal shafts, or when the center distance is greater than eight times the diameter of the smaller pulley on drive ratios less than 3:1, both pulleys should be flanged
- When a drive has three pulleys, at least two should be flanged
- If the drive has more than three pulleys, every other pulley should be flanged
| Belt Width | 1 in |
| Type | KF-1 |
| Belt Size | H |
| No. of Teeth | 26 |
| Pitch Diameter | 4.138 in |
| Hub Projection | 0.06 in |
| Bore Range [Min] | 0.5 in |
| Length Through Bore | 1.25 in |
| Outside Dia. | 4.084 in |
| Bushing Type | Taperlock |
| Bore Range [Max] | 2 in |
| Finished Bore | N/A |
| Bushing Series | 2012 |
| Hub Dia. | N/A |
| Belt Pitch | 0.5 in |
| Bore Type | Taper-Lock and QD Bushed |
| Weight | 3.6 LB |
| EAN or UPC | 782475088386 |
