Find a Service Center
- 1/2" Pitch
- H Belt Type
- 1 1/2" Belt Width
- 18 Teeth
- 2.865" Pitch Diameter
features
- Nonslip
- No lubrication required
- Minimum backlash
- Constant speed
caution
- It is necessary to use a minimum of one flanged pulley to prevent the belt from riding off
- When the drive is operated on other than horizontal shafts, or when the center distance is greater than eight times the diameter of the smaller pulley on drive ratios less than 3:1, both pulleys should be flanged
- When a drive has three pulleys, at least two should be flanged
- If the drive has more than three pulleys, every other pulley should be flanged
| Bore Range [Min] | 0.5 in |
| Hub Projection | 0.11 in |
| Length Through Bore | 1 in |
| Bushing Series | 1210 |
| Finished Bore | N/A |
| Belt Size | H |
| Outside Dia. | 2.811 in |
| Bore Range [Max] | 1.25 in |
| Bushing Type | Taperlock |
| Bore Type | Taper-Lock and QD Bushed |
| Pitch Diameter | 2.865 in |
| Belt Pitch | 0.5 in |
| Belt Width | 1.5 in |
| Hub Dia. | N/A |
| No. of Teeth | 18 |
| Type | KF-1 |
| Weight | 1.55 LB |
| EAN or UPC | 782475576807 |
