Find a Service Center
- 1/2" Pitch
- H Belt Type
- 2" Belt Width
- 16 Teeth
- 2.546" Pitch Diameter
features
- Nonslip
- No lubrication required
- Minimum backlash
- Constant speed
caution
- It is necessary to use a minimum of one flanged pulley to prevent the belt from riding off
- When the drive is operated on other than horizontal shafts, or when the center distance is greater than eight times the diameter of the smaller pulley on drive ratios less than 3:1, both pulleys should be flanged
- When a drive has three pulleys, at least two should be flanged
- If the drive has more than three pulleys, every other pulley should be flanged
| Finished Bore | N/A |
| Bushing Series | 1108 |
| Belt Size | H |
| Hub Dia. | 0 in |
| No. of Teeth | 16 |
| Bore Range [Max] | 1.125 in |
| Hub Projection | 3/4 in |
| Bushing Type | Taperlock |
| Length Through Bore | 0.88 in |
| Pitch Diameter | 2.546 in |
| Belt Width | 2 in |
| Type | KF-1 |
| Bore Range [Min] | 0.5 in |
| Bore Type | Taper-Lock and QD Bushed |
| Outside Dia. | 2.492 in |
| Belt Pitch | 0.5 in |
| Weight | 1.9 LB |
| EAN or UPC | 782475656738 |
