Find a Service Center
- 2-Bolt Thru-Bolt Pillow Block
- 1 3/4" Shaft
- 5.695" Bolt Centers
- 2 1/8" Centerline to Base
- Polymer Housing
| Center of Bearing to Back of Inner Ring | 21/32 in |
| Center of Bearing to Front of Inner Ring | 1 3/16 in |
| Mounted Unit Duty | Corrosion Resistant-Duty |
| Shaft Dia. | 1.75 in |
| Locking Device | GRIP TIGHT™ Adapter |
| Bolt Hole Spacing Range [Min] | 5 27/64 in |
| Outer Ring Size | 209 |
| Bolt Hole Length | 7/8 in |
| Bolt Size | 1/2 in |
| Bolt Holes | 2 |
| Housing Construction | 1 Piece |
| Series | Grip Tight™ |
| Bolt Hole Spacing | 5.695 in |
| Length Through Bore | 1.84375 in |
| Insert Type | Corrosion-Resistant Insert |
| Housing Height | 4 5/16 in |
| Bearing Type | Ball Bearing |
| Base Length | 7 13/64 in |
| Bolt Hole Spacing Range [Max] | 5 31/32 in |
| Bearing Design | Non-Expansion |
| Misalignment Range | ±2° |
| Lubrication | Relubricatable |
| End Type | Open End |
| Base Width | 2 7/64 in |
| Housing Material | Polymer |
| Seal Type | PROGUARD™ Plus Contact Seals w/Flingers |
| Collar O.D. | 2 43/64 in |
| Inch/Metric | Inch |
| Base Height | 27/32 in |
| Pillow Block Type | Thru-Bolt |
| Weight | 5.14 LB |
| EAN or UPC | 782475975310 |
