Find a Service Center
- 30 mm Shaft
- 39.7 mm Base to Center
- 108.0 mm - 127.0 mm Bolt Spacing
- Contact Seals w/Flingers
- Cast Iron Housing
| Collar O.D. | 51 mm |
| Bearing Type | Ball Bearing |
| Series | Grip Tight™ |
| Adapter Assembly | AN-GT-06-30M |
| Bolt Holes | 2 |
| Bearing Design | Non-Expansion |
| Locking Device | GRIP TIGHT™ Adapter |
| Lubrication | Relubricatable |
| Length Through Bore | 40.9 mm |
| Bolt Hole Spacing | 117.5 mm |
| Inch/Metric | Metric |
| Bolt Hole Length | 23.8 mm |
| Shaft Dia. | 30 mm |
| Center of Bearing to Front of Inner Ring | 27.4 mm |
| End Type | Open End |
| Bolt Hole Spacing Range [Min] | 108.0000 mm |
| Housing Height | 81 mm |
| Housing Material | Cast Iron |
| Outer Ring Size | 206 |
| Base Height | 15.9 mm |
| Seal Type | Contact Seals w/Flingers |
| Housing No. | P2B-GTB-06 |
| Bolt Size | M12 |
| Housing Construction | 1 Piece |
| Pillow Block Type | Thru-Bolt |
| Bolt Hole Spacing Range [Max] | 127.0000 mm |
| Base Width | 44.1 mm |
| Mounted Unit Duty | Normal-Duty |
| Base Length | 158.8 mm |
| Weight | 2.59 LB |
| EAN or UPC | 782475881376 |
