Find a Service Center
- 1/5" Pitch
- XL Belt Size
- 3/8" or 1/4" Belt Width
- 24 Teeth
- 1.528" Pitch Diameter
applications
- Agitators and mixers
- Compressors
- Conveyors
- Fans and blowers
- Paper machinery
- Pumps
features
- Nonslip
- No lubrication required
- Minimum backlash
- Constant speed
caution
- It is necessary to use a minimum of one flanged pulley to prevent the belt from riding off
- When the drive is operated on other than horizontal shafts, or when the center distance is greater than eight times the diameter of the smaller pulley on drive ratios less than 3:1, both pulleys should be flanged
- When a drive has three pulleys, at least two should be flanged
- If the drive has more than three pulleys, every other pulley should be flanged
| Belt Width | 0.375 in, 0.25 in |
| Bore Range [Max] | 0.6875 in |
| Pitch Diameter | 1.528 in |
| Bore Type | Reborable |
| Hub Projection | 0.35 in |
| Bushing Series | N/A |
| Length Through Bore | 0.88 in |
| Type | DF-1 |
| No. of Teeth | 24 |
| Bushing Type | None |
| Bore Range [Min] | 0.25 in |
| Finished Bore | N/A |
| Belt Size | XL |
| Belt Pitch | 0.2 in |
| Hub Dia. | 1.06 in |
| Weight | 0.35 LB |
| EAN or UPC | 782475087808 |
