Find a Service Center
- Crimp Fitting
- 90° Fitting Angle
- 1/2 in Tube Outside Diameter
- 1/2 in Hose Inside Diameter
- 2.68 in Overall Length
features
- Compatible with the most Weatherhead standard and newer generation hose styles
- Combining best-in-class technologies to meet and exceed the highest globally recognized standards for one and two wire braid hydraulic hose assemblies
- Hose ends have a scribe line around the circumference of the socket to easily identify the location where the Coll-O-Crimp collets are positioned for crimping
- Advanced "Bite-the-Wire" design provides higher operating and burst pressure
- Eliminates cool down leakage
- Flat crimp provides low profile for easier routing
| Thread Size | 1/2-14 |
| No. of Ends | 2 |
| Style | Crimp |
| Fitting Type | Male Pipe Swivel 90° Elbow |
| Hose Dash Size | 8 |
| Finish | Dura-Kote |
| Hole Dia. | 0.38 in |
| End Types | NPT & Hose Crimp |
| Fitting Angle | 90° |
| Series | Z Series |
| Compatible Hose | H104, H245, H425, H345, H145, H350, H190, H290, H280, H145R, H190H, H290H, H290L, H400, H421, H9949, H0105 (-06 thru -12, -20), H0106 (-04 thru -10), H115 (-04 thru -20), H116 (-04, -06, -08), H1571 (-12 only), H1776 (-04 thru -20), H1777 (-04, -06, 08), H1812 (-04 thru -20), H1981 (-04, -06, -08), H1982 (-06 thru -16), H245L, H265 (-04, -06, -08, -12, -16), H275 (-04 thru -16), H6002 (-08, -12, -16), H6008 (-16 & -20), H6009 (-20 only), H9622 (-12, -16, -20) |
| End Gender 1 | Male |
| Height | 2.050 in |
| Thread Sealant | No |
| Tube O.D. | 1/2 in |
| Plating | Trivalent Zinc Plated |
| Hose I.D. | 1/2 in |
| Item Type | Fitting Assembly |
| Hex Size | 3/4 in, 15/16 in |
| O.D. | 1.22 in |
| Compatible Tube O.D. | 0.5 |
| Overall Length | 2.68 in |
| End Size | 1/2 Hose Crimp, 1/2 NPT (m) |
| Threads per Inch | 14 |
| Material | Carbon Steel |
| End Type 2 | Line/Hose/Tube |
| End Type 1 | MPT |
| Rigid/Swivel | Swivel |
| Hex Size 1 | 15/16 in |
| Hose Cut-Off Factor | 1.51 in |
| Hex Size 2 | 3/4 in |
| Weight | 0.12 LB |
