Find a Service Center
- D03 Dual Relief Valve
- Pressure Limited in Port A
- Drained into Port B
- 145-2,900 psi
- Screw w/Locknut Adjustment
description
- Relief valves limit the maximum pressure in a system. These are mainly used to prevent high pressures from damaging system components and provide a path to reservoir. When these valves are used with a pressure-compensated pump, the pressure should be set approximately 10% higher than the pump compensator. Cross port relief valves are mainly used in motor circuits to prevent over pressurization. Sequence valves allow fluid to pass once the inlet pressure to the valve reaches the preset pressure. Pressure-reducing valves only allow pressure to pass up to the preset level. These valves are ideal to reduce the pressure in a particular circuit requiring a lower pressure.
| Design No. | 41 |
| Adjustment Type, Dual | Screw w/Locknut |
| Adjustment Type | Screw w/ Locknut |
| External Drain | No |
| Port Drained Into | Port B |
| Operating Pressure [Max] | 4500 psi |
| Manufacturer Part No. | DGMC2-3-AB-CW-BA-CW-41 |
| Pressure Adjustment Range (psi) | 145 to 2,900 |
| Pressure Limited In | Port A |
| Pressure Limited In, Dual | Port B |
| Relief Function | Dual |
| Remote Control Port | No |
| Gage Port | None |
| Flow [Max] | 16 gal/min |
| Pressure Adjustment Range, Dual (psi) | 145-2,900 |
| Port Drained Into, Dual | Port A |
| Valve Type | Dual (Cross Port) Relief Valve "A" to "B" & "B" to "A" |
| Interface | D03 |
| External Drain, Dual | No |
| Family Name | Vickers D03 SystemStak™ Valves |
| Model No. | DGMC2-3-AB-CW-BA-CW-41 |
| Weight | 3.3 LB |
