
- Solenoid Actuated Valve
- Solenoid Operated Operation
- D05 NFPA Size
- Single Solenoid
- 2-Position Spring Centered, End to Center, Single End Function
description
- DGS4S models are direct solenoid operated directional control valves. Their primary function in a hydraulic circuit is to direct fluid flow to a work cylinder or to control the direction of rotation of a hydraulic motor.
- Port connections are made by mounting the valve on a manifold or subplate containing the interface.
- Electrical connections to the valve are made in an electrical wiring housing or by various plug-in devices. A ground terminal is provided.
caution
- Any sliding spool valve, if held for long periods of time, may stick and not spring return due to fluid residue formation and therefore should be cycled periodically to prevent this from happening
Pilot/Drain | None |
Electrical Connection | KU W/ Deutsch Connector |
Rated Flow [Max] | 24 gal/min |
Leakage | Standard Performance |
Flow Direction Code | 4 |
No. of Stages | Single Stage |
Crossover | All Ports Blocked |
NFPA Size | D05 |
Pilot Valve Type | N/A |
Valve Type | Standard-Duty |
Operation | Solenoid Operated |
Body Material | Gray Iron |
Temperature Range [Min] | 68 °F |
Pressure [Max] | 12000 psi |
Indicator Lights | No |
Seal Material | Buna-N |
Compatible Fluids | Petroleum Oil |
Port Restrictor Plugs | None |
Mechanical Options | None |
Electrical Options | None |
Coil Type | Flying Leads |
Spool Code | 2 |
Performance | Standard Performance |
Overrides | No Overrides |
Spool Spring Arrangement Code | B |
Port T Pressure Rating | 1000 psi |
Surge Suppressor/Damper | None |
Response Type | Standard Response |
Tank Port Rating | 1000 |
Actuator Type | Solenoid |
Coil Type Code | None |
Mounting | Subplate/Manifold Mount |
Voltage & Frequency | 110/120 VAC - 50/60 Hz |
Response Time | 20 to 40 ms |
Center Position | All Ports Blocked |
Electrical Options Code | None |
Model No. | DG4S4-012B-B-60 |
Function | 2-Position Spring Centered, End to Center, Single End |
AC/DC | AC |
Reducer Module | N/A |
Design No. | 60 |
Temperature Range [Max] | 122 °F |
Actuation Identification | Solenoid B |
Coil Rating Code | B |
Solenoid | Single |
Pressure Port Check Valve Pressure | N/A |
Cycle Rate [Max] | N/A |
Manual Override | Plain Override |
Fluid Cleanliness | 19/17/14 micron |
Mechanical Options Code | None |
Weight | 10.0 LB |
