Find a Service Center
- Pressure Control Valve
- Relief Valve Type
- Proportional Actuation Option
- 60 to 725 psi Pressure Adjustment Range
- Screw W/ Locknut Adjustment Type
description
- Relief valves limit the maximum pressure in a system. These are mainly used to prevent high pressures from damaging system components and provide a path to reservoir. When these valves are used with a pressure-compensated pump, the pressure should be set approximately 10% higher than the pump compensator. Cross port relief valves are mainly used in motor circuits to prevent over pressurization. Sequence valves allow fluid to pass once the inlet pressure to the valve reaches the preset pressure. Pressure-reducing valves only allow pressure to pass up to the preset level. These valves are ideal to reduce the pressure in a particular circuit requiring a lower pressure.
includes
- Have all the internal passages necessary to serve the directional valve topping them
- Mounting surfaces and port patterns are international standards
compliances
- 0
| Pressure Adjustment Range, Dual (psi) | 60-725 |
| Seal Material | Buna-N |
| No. of Stages | Two Stage |
| Performance | Standard Performance |
| Family Name | Vickers D05 SystemStak™ Valves |
| Interface | D05 |
| Remote Control Port | No |
| Gage Port | None |
| External Drain | No |
| Body Material | Steel |
| Adjustment Type, Dual | Screw w/Locknut |
| Pressure Limited In | Port A |
| Relief Function | Dual |
| Pressure Limited In, Dual | Port B |
| Adjustment Type | Screw w/ Locknut |
| External Drain, Dual | No |
| Model No. | DGMC2-5-AB-AW-BA-AW-30 |
| Operating Pressure [Max] | 4500 psi |
| Pressure Adjustment Range (psi) | 60 to 725 |
| Port Drained Into, Dual | Port A |
| Port Drained Into | Port B |
| Flow [Max] | 32 gal/min |
| Pressure [Max] | 4500 psi |
| Manufacturer Part No. | DGMC2-5-AB-AW-BA-AW-30 |
| Adjustment | Yes |
| Design No. | 30 |
| Valve Type | Dual (Cross Port) Relief Valve "A" to "B" & "B" to "A" |
| Actuation Option | Proportional |
| Weight | 7.9 LB |
