These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Indicator Lights
No
Coil Rating Code
G
Port T Code
7
Cycle Rate [Max]
N/A
Valve Type
High-Performance
Operation
Solenoid Operated
Actuator Type
Solenoid
Function Code
6
Electrical Connector Code
None
Surge Suppressor/Damper
None
Spool Code
6
Port Restrictor Plugs
None
Seal Material
Buna-N
Pilot/Drain
None
Reducer Module
N/A
Mechanical Options
None
Electrical Connection
DIN 43650
Center Position
P Blocked, A & B to T
Port T Pressure Rating
3000 psi
Housing Code
None
AC/DC
DC
Pressure [Max]
5075 psi
Spool Indicator Switch Code
None
Overrides
No Overrides
Voltage & Frequency
12 VDC
Surge Suppressor/Damper Code
None
Electrical Options
None
Solenoid Indicator Lights Code
None
Pilot Valve Type
N/A
Design No.
60
NFPA Size
D03
Spool Shift Timing
N/A
Solenoid
Double
EN Code
None
Spool Spring Arrangement Code
C
Function
3-Position Spring Centered
Manual Override Option Code
None
Coil Type
DIN 43650
Solenoid Code
G
Coil Type Code
U
Solenoid Energization Code
None
Response Type
Standard Response
Port Restrictor Plug Code
None
Rated Flow [Max]
21 gal/min
Crossover
P Blocked, A or B to T
Pressure Port Check Valve Pressure
N/A
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
