These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Solenoid
Double
NFPA Size
D03
Coil Rating Code
G
Electrical Options
None
Coil Type Code
U
Function
3-Position Spring Centered
Design No.
60
Surge Suppressor/Damper
None
Surge Suppressor/Damper Code
None
Pilot/Drain
None
Coil Type
DIN 43650
Manual Override Option Code
None
Solenoid Indicator Lights Code
None
Port Restrictor Plug Code
None
Solenoid Energization Code
None
Indicator Lights
No
Reducer Module
N/A
Housing Code
None
Response Type
Standard Response
Cycle Rate [Max]
N/A
Overrides
No Overrides
Mechanical Options
None
Rated Flow [Max]
21 gal/min
Electrical Connector Code
None
Operation
Solenoid Operated
Center Position
P Blocked, A & B to T
Pilot Valve Type
N/A
Port Restrictor Plugs
None
Valve Type
High-Performance
Electrical Connection
DIN 43650
AC/DC
DC
Port T Code
7
Spool Spring Arrangement Code
C
Spool Code
6
Solenoid Code
G
Seal Material
Buna-N
Function Code
6
EN Code
None
Spool Shift Timing
N/A
Actuator Type
Solenoid
Port T Pressure Rating
3000 psi
Pressure [Max]
5075 psi
Spool Indicator Switch Code
None
Voltage & Frequency
12 VDC
Crossover
P Blocked, A or B to T
Pressure Port Check Valve Pressure
N/A
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
