Find a Service Center
- Flow Control Valve
- Flow Divider/Combiner Type
- FDC1-16 Series
- 12 gal/min Minimum Flow
- 47 gal/min Maximum Flow
description
- Pressure-compensated, spool-type, screw-in, flow divider/combiner cartridge. This valve is used in the dividing mode. It will take the inlet flow (port 3) and split the flow according to the ratio specified, regardless of system pressure to ports 2 and 4. In the combining mode this valve will take the inlet flows from ports 2 and 4 and combine them into port 3 according to the ratio specified.
caution
- Steel housings must be used for operating pressures above 210 bar (3,000 psi)
| Valve Material | Cartridge only |
| Series | FDC1-16 |
| Housing Material | Aluminum |
| Seal Kit Viton | 889638 |
| Divider Flow | 24 gal/min |
| Cavity | C-16-4 |
| Recommend Filtration Level | 18/16/13 microns |
| Valve Torque into Cavity | 108 to 122 Nm |
| Manufacturer Part No. | FDC1-16-0-44 |
| Port Type | Cartridge Only |
| No. of Housing Ports | 4 |
| Flow [Max] | 47 gal/min |
| Body Type | 10 |
| Leakage | Standard |
| Seal Kit Buna | 889634 |
| Seal Material | Buna-N |
| Model No. | FDC1-16-0-44 |
| Style | Spool |
| Type | Flow Divider/Combiner |
| Pressure [Max] | 3000 psi |
| Temperature Range [Min] | -40 °F |
| No. of Valve Ports | 4 |
| Temperature Range [Max] | 248 °F |
| Flow [Min] | 12 gal/min |
| Installation | Screw-in Cartridge |
| Operation | Direct Acting |
| Weight | 0.78 LB |
