Find a Service Center
- D05 Double Solenoid Operated Valve
- 12 VDC
- Ground Terminal
- No Coil
- 3-Position Spring Centered
description
- DGS4S models are direct solenoid operated directional control valves. Their primary function in a hydraulic circuit is to direct fluid flow to a work cylinder or to control the direction of rotation of a hydraulic motor.
- Port connections are made by mounting the valve on a manifold or subplate containing the interface.
- Electrical connections to the valve are made in an electrical wiring housing or by various plug-in devices. A ground terminal is provided.
caution
- Any sliding spool valve, if held for long periods of time, may stick and not spring return due to fluid residue formation and therefore should be cycled periodically to prevent this from happening
| Response Type | Standard Response |
| Operation | Solenoid Operated |
| Valve Type | Standard-Duty |
| Center Position | P Blocked, A & B to T |
| Spool Code | 6 |
| Voltage & Frequency | 12 VDC |
| Pilot/Drain | None |
| Actuator Type | Solenoid |
| Cycle Rate [Max] | N/A |
| Design No. | 50 |
| Port T Pressure Rating | 1000 psi |
| AC/DC | DC |
| Mechanical Options | None |
| Reducer Module | N/A |
| Seal Material | Buna-N |
| Pressure Port Check Valve Pressure | N/A |
| Electrical Options Code | None |
| Solenoid Air Gap Code | None |
| Spool Spring Arrangement Code | C |
| NFPA Size | D05 |
| Electrical Connection | Ground Terminal |
| Electrical Options | None |
| Pressure [Max] | 3000 psi |
| Port Restrictor Plugs | None |
| Crossover | P Blocked, A or B to T |
| Flow Direction Code | 4 |
| Function | 3-Position Spring Centered |
| Indicator Lights | No |
| Coil Rating Code | None |
| Coil Type | No Coil |
| Overrides | No Overrides |
| Pilot Valve Type | N/A |
| Rated Flow [Max] | 20 gal/min |
| Solenoid | Double |
| Mechanical Options Code | None |
| Surge Suppressor/Damper | None |
| Weight | 10.0 LB |
