
- Solenoid Actuated Valve
- Solenoid Operated Operation
- D05 NFPA Size
- Double Solenoid
- 3-Position Spring Centered Function
description
- DGS4S models are direct solenoid operated directional control valves. Their primary function in a hydraulic circuit is to direct fluid flow to a work cylinder or to control the direction of rotation of a hydraulic motor.
- Port connections are made by mounting the valve on a manifold or subplate containing the interface.
- Electrical connections to the valve are made in an electrical wiring housing or by various plug-in devices. A ground terminal is provided.
caution
- Any sliding spool valve, if held for long periods of time, may stick and not spring return due to fluid residue formation and therefore should be cycled periodically to prevent this from happening
Actuation Identification | Solenoid A, Solenoid B |
Pilot/Drain | None |
Temperature Range [Min] | 68 °F |
Coil Type | No Coil |
Body Material | Gray Iron |
Mechanical Options | None |
Pilot Valve Type | N/A |
Reducer Module | N/A |
Electrical Connection | Ground Terminal |
Voltage & Frequency | 115 VAC - 60 Hz |
Cycle Rate [Max] | N/A |
Temperature Range [Max] | 122 °F |
No. of Stages | Single Stage |
Function | 3-Position Spring Centered |
Leakage | Standard Performance |
Fluid Cleanliness | 19/17/14 micron |
Mechanical Options Code | None |
Operation | Solenoid Operated |
Center Position | P Blocked, A & B to T |
Indicator Lights | No |
Seal Material | Buna-N |
Coil Rating Code | None |
Solenoid | Double |
Mounting | Subplate/Manifold Mount |
Rated Flow [Max] | 24 gal/min |
Manual Override | Plain Override |
Electrical Options | None |
Performance | Standard Performance |
Electrical Options Code | None |
Overrides | No Overrides |
Compatible Fluids | Petroleum Oil |
Spool Code | 33 |
NFPA Size | D05 |
Flow Direction Code | 4 |
Port Restrictor Plugs | None |
Tank Port Rating | 1000 |
Port T Pressure Rating | 1000 psi |
Pressure Port Check Valve Pressure | N/A |
Solenoid Air Gap Code | None |
Crossover | P Blocked, A or B to T |
Design No. | 50 |
AC/DC | AC |
Actuator Type | Solenoid |
Spool Spring Arrangement Code | C |
Surge Suppressor/Damper | None |
Valve Type | Standard-Duty |
Model No. | DG4S4-0133C-50 |
Pressure [Max] | 11000 psi |
Response Type | Standard Response |
Weight | 5.75 LB |
