Find a Service Center
- PVM081 Series Industrial Axial Piston Pump
- CW Rotation
- 1 1/4 in Keyed Shaft
- SAE C, 4 Bolt w/5 in Pilot
- 37 gal/min @ 1800 rpm
description
- Open circuit, axial piston designs that feature a saddle-type yoke with steel-backed polymer bearings. The stiff yoke reduces deflection and allows even loading of bearings, improving life. A single control piston reduces loading on the yoke, resulting in reduced pump size that allows installation in tighter locations. Capable of operating with many types of hydraulic fluids used in industrial and mobile systems. High water content and phosphate ester fluids can be accommodated, in addition to the typical petroleum-based and synthetic fluids.
applications
- Metal shears
- Material conveyors
- Automotive transfer lines
- Process industry machines
- Flight simulators
- Entertainment rides
- Tube forming and bending
- Blow molding machines
- Metal die casters
features
- Compact design
- Inlet and outlet gauge ports and adjustable maximum displacement stops
- Low 4% pressure ripple
- Long pump life
- Quiet pump operation
- Reduced maintenance
- Design promotes leak-free system
| Origin | Axial Piston Pumps |
| Port Location | Side Port |
| Flow @ RPM | 20 gpm @ 1000 rpm, 25 gpm @ 1200 rpm, 31 gpm @ 1500 rpm, 37 gpm @ 1800 rpm |
| Auxiliary Mounting Pad | Single Pump, Non-Thru-Drive |
| Displacement (in³/rev) | 4.94 |
| Outlet Port | 1 in 4-Bolt Flange/Code 62 |
| Control Type | Pressure & Flow Compensator w/Plugged Orifice |
| Rotation | Right Hand (CW) |
| Operating Pressure [Max] | 4000 psi |
| Port Type | Flange Ports |
| Valve Plate | Electric Motor Speeds |
| Manufacturer Part No. | PVM081ER09GS02AAC2320000000A |
| Bolt Circle Dia. | 6 3/8 in |
| Pilot Diameter | 5 in |
| Pump Type | Open Circuit Axial |
| Shaft Dia. | 1.25 in |
| Shaft Length | 1.89 in |
| RPM [Max] | 1800 rpm |
| Special Features | Adjustable Maximum Displacement Stop & Single Shaft Seal |
| GPM @ Speed | 37 gpm @ 1800 rpm |
| Seal Material | Buna-N |
| Model No. | PVM081ER09GS02AAC2320000000A |
| Flow Compensator Setting | 20 Bar |
| Shaft Type | Straight Keyed |
| Inlet Port | 2 in 4-Bolt Flange/Code 61 |
| Spline Description | N/A |
| Paint | No Paint |
| Mounting Flange | SAE C, 4 Bolt |
| Shaft Description | SAE C |
| Key | 5/16 in |
| HP @ 1,800 rpm [Max] | 75 hp |
| Pressure Compensator Setting | 230 Bar |
| Series | PVM081 |
| Weight | 99.0 LB |
