02-356271

Vickers D05 Solenoid Valve

Item #101910626

Auto Replenish

each One-time purchase

Product Details

DGS4S models are direct solenoid operated directional control valves. Their primary function in a hydraulic circuit is to direct fluid flow to a work cylinder or to control the direction of rotation of a hydraulic motor.
Port connections are made by mounting the valve on a manifold or subplate containing the interface.
Electrical connections to the valve are made in an electrical wiring housing or by various plug-in devices. A ground terminal is provided.

Any sliding spool valve, if held for long periods of time, may stick and not spring return due to fluid residue formation and therefore should be cycled periodically to prevent this from happening

Specifications

Port Restrictor Plugs	None
Mechanical Options Code	LH
Coil Type Code	None
Port T Pressure Rating	1000 psi
Rated Flow [Max]	25 gal/min
Seal Material	Buna-N
Model No.	DG4S4-010B-B-60-LH
Solenoid	Single
Cycle Rate [Max]	N/A
Actuator Type	Solenoid
Indicator Lights	No
Electrical Options Code	None
Electrical Connection	KU W/ Deutsch Connector
AC/DC	AC
Mechanical Options	Single Solenoid Reverse Assembly
Surge Suppressor/Damper	None
Crossover	All Ports Open
Coil Rating Code	B
Valve Type	Standard-Duty
Overrides	No Overrides
Design No.	60
Voltage & Frequency	110/120 VAC - 50/60 Hz
Spool Spring Arrangement Code	B
Response Type	Standard Response
Center Position	All Ports Open
Reducer Module	N/A
Electrical Options	None
Pressure Port Check Valve Pressure	N/A
Tank Port Rating	1000
Pressure [Max]	3600 psi
Pilot/Drain	None
Operation	Solenoid Operated
Pilot Valve Type	N/A
Spool Code	0
NFPA Size	D05
Flow Direction Code	4
Function	2-Position Spring Centered, End to Center, Single End
Coil Type	Flying Leads
Weight	10.0 LB