These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Cycle Rate [Max]
N/A
Actuator Type
Solenoid
Voltage & Frequency
110/120 VAC – 50/60 Hz
Pilot/Drain
None
Solenoid Energization Code
None
Center Position
All Ports Blocked
Rated Flow [Max]
21 gal/min
Pressure Port Check Valve Pressure
N/A
Function Code
2
Electrical Connector Code
PA5
Port Restrictor Plug Code
None
Surge Suppressor/Damper
None
Coil Type Code
F
Manual Override Option Code
None
Spool Indicator Switch Code
S5
Spool Shift Timing
N/A
Solenoid
Single
Indicator Lights
Yes
Port Restrictor Plugs
None
Electrical Connection
Five Pin Connector
Spool Code
2
Crossover
All Ports Blocked
EN Code
None
Port T Code
2
Coil Type
Flying Leads, 1/2 NPT Thread Wiring Housing
Mechanical Options
None
Surge Suppressor/Damper Code
None
Function
2-Position Spring Offset, End to End
Reducer Module
N/A
Pressure [Max]
5075 psi
Housing Code
W
Spool Spring Arrangement Code
A
Solenoid Code
B
Operation
Solenoid Operated
Seal Material
Buna-N
Pilot Valve Type
N/A
Coil Rating Code
B
Design No.
60
Solenoid Indicator Lights Code
L
NFPA Size
D03
Valve Type
High-Performance
Response Type
Standard Response
Electrical Options
None
AC/DC
AC
Overrides
No Overrides
Port T Pressure Rating
150 psi
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back