Find a Service Center
- Solenoid Actuated Valve
- Solenoid Operated Operation
- D05 NFPA Size
- Single Solenoid
- 2-Position Spring Offset Function
description
- DGS4S models are direct solenoid operated directional control valves. Their primary function in a hydraulic circuit is to direct fluid flow to a work cylinder or to control the direction of rotation of a hydraulic motor.
- Port connections are made by mounting the valve on a manifold or subplate containing the interface.
- Electrical connections to the valve are made in an electrical wiring housing or by various plug-in devices. A ground terminal is provided.
caution
- Any sliding spool valve, if held for long periods of time, may stick and not spring return due to fluid residue formation and therefore should be cycled periodically to prevent this from happening
| Function | 2-Position Spring Offset |
| Valve Type | Standard-Duty |
| AC/DC | AC |
| Operation | Solenoid Operated |
| Center Position | All Ports Blocked |
| Mechanical Options Code | None |
| Rated Flow [Max] | 25 gal/min |
| NFPA Size | D05 |
| Port T Pressure Rating | 1000 psi |
| Pressure Port Check Valve Pressure | N/A |
| Pilot Valve Type | N/A |
| Coil Type Code | U |
| Mechanical Options | None |
| Response Type | Standard Response |
| Model No. | DG4S4-012A-U-C-60 |
| Electrical Options | None |
| Design No. | 60 |
| Flow Direction Code | 4 |
| Coil Rating Code | C |
| Cycle Rate [Max] | N/A |
| Pressure [Max] | 3600 psi |
| Tank Port Rating | 1000 |
| Spool Code | 2 |
| Solenoid | Single |
| Crossover | All Ports Blocked |
| Reducer Module | N/A |
| Coil Type | ISO 4400 (Din 43650) Connector |
| Seal Material | Buna-N |
| Actuator Type | Solenoid |
| Indicator Lights | No |
| Electrical Options Code | None |
| Pilot/Drain | None |
| Overrides | No Overrides |
| Voltage & Frequency | 110/120 VAC - 50/60 Hz |
| Port Restrictor Plugs | None |
| Electrical Connection | DIN 43650 |
| Surge Suppressor/Damper | None |
| Spool Spring Arrangement Code | A |
| Weight | 10.0 LB |
