These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Electrical Options
None
Design No.
60
Electrical Connection
DIN 43650
Center Position
P Blocked, A & B to T
Seal Material
Buna-N
Spool Indicator Switch Code
None
Pilot Valve Type
N/A
Surge Suppressor/Damper
None
Voltage & Frequency
24 VDC
Housing Code
None
Function Code
6
Spool Shift Timing
N/A
EN Code
EN21
Solenoid Energization Code
None
Solenoid Indicator Lights Code
None
Surge Suppressor/Damper Code
None
Pressure [Max]
5075 psi
Crossover
P Blocked, A or B to T
Port T Pressure Rating
3000 psi
Actuator Type
Solenoid
Port T Code
7
Manual Override Option Code
None
Solenoid Code
H
Valve Type
High-Performance
Rated Flow [Max]
21 gal/min
Coil Rating Code
H
Solenoid
Double
Port Restrictor Plugs
None
Coil Type
DIN 43650
Cycle Rate [Max]
N/A
Operation
Solenoid Operated
Response Type
Standard Response
Mechanical Options
None
Spool Spring Arrangement Code
N
Function
3-Position Detented
NFPA Size
D03
Reducer Module
N/A
Pressure Port Check Valve Pressure
N/A
Coil Type Code
U
Spool Code
6
Electrical Connector Code
None
Overrides
No Overrides
Port Restrictor Plug Code
None
Pilot/Drain
None
Indicator Lights
No
AC/DC
DC
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
