These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
EN Code
None
Coil Type Code
U6
Function
3-Position Detented
Function Code
2
Center Position
All Ports Blocked
Operation
Solenoid Operated
Pilot/Drain
None
AC/DC
DC
Coil Type
Connector Fitted w/Lights
Reducer Module
N/A
Surge Suppressor/Damper Code
None
Spool Code
2
Solenoid Indicator Lights Code
None
Spool Shift Timing
N/A
Mechanical Options
None
Spool Indicator Switch Code
None
Surge Suppressor/Damper
None
Pressure Port Check Valve Pressure
N/A
Port T Code
7
Pressure [Max]
5075 psi
Overrides
No Overrides
Electrical Options
None
Pilot Valve Type
N/A
Electrical Connection
Connector Fitted w/ Lights
Port T Pressure Rating
3000 psi
Actuator Type
Solenoid
Response Type
Standard Response
Cycle Rate [Max]
N/A
Crossover
All Ports Blocked
Port Restrictor Plug Code
None
Coil Rating Code
H
Solenoid Energization Code
None
Valve Type
High-Performance
Indicator Lights
No
Seal Material
Buna-N
NFPA Size
D03
Port Restrictor Plugs
None
Electrical Connector Code
None
Housing Code
None
Manual Override Option Code
None
Design No.
60
Voltage & Frequency
24 VDC
Rated Flow [Max]
21 gal/min
Spool Spring Arrangement Code
N
Solenoid
Double
Solenoid Code
H
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
