Find a Service Center
- Solenoid Actuated Valve
- Solenoid Operated Operation
- D05 NFPA Size
- Single Solenoid
- 2-Position Spring Centered, End To Center Function
description
- DGS4S models are direct solenoid operated directional control valves. Their primary function in a hydraulic circuit is to direct fluid flow to a work cylinder or to control the direction of rotation of a hydraulic motor.
- Port connections are made by mounting the valve on a manifold or subplate containing the interface.
- Electrical connections to the valve are made in an electrical wiring housing or by various plug-in devices. A ground terminal is provided.
caution
- Any sliding spool valve, if held for long periods of time, may stick and not spring return due to fluid residue formation and therefore should be cycled periodically to prevent this from happening
| Electrical Options | None |
| Response Type | Standard Response |
| Rated Flow [Max] | 24 gal/min |
| Pressure Port Check Valve Pressure | N/A |
| Valve Type | Standard-Duty |
| Watt Rating | 30 W |
| Pilot Valve Type | N/A |
| Spool Spring Arrangement Code | B |
| Temperature Range [Max] | 122 °F |
| Port Restrictor Plugs | None |
| Temperature Range [Min] | 68 °F |
| Mechanical Options Code | None |
| Electrical Connection | DIN 43650 |
| Solenoid | Single |
| Performance | Standard Performance |
| Spool Code | 0 |
| Pilot/Drain | None |
| Mounting | Subplate/Manifold Mount |
| Flow Direction Code | 4 |
| Manual Override | Plain Override |
| Operation | Solenoid Operated |
| Fluid Cleanliness | 19/17/14 micron |
| NFPA Size | D05 |
| Response Time | 50 to 80 ms |
| Coil Type Code | U |
| Cycle Rate [Max] | N/A |
| No. of Stages | Single Stage |
| Leakage | Standard Performance |
| Surge Suppressor/Damper | None |
| Port T Pressure Rating | 1000 psi |
| Actuator Type | Solenoid |
| Actuation Identification | Solenoid B |
| AC/DC | DC |
| Indicator Lights | No |
| Tank Port Rating | 1000 |
| Model No. | DG4S4-010B-U-G-60 |
| Body Material | Gray Iron |
| Crossover | All Ports Open |
| Pressure [Max] | 9000 psi |
| Electrical Options Code | None |
| Function | 2-Position Spring Centered, End To Center |
| Seal Material | Buna-N |
| Coil Type | ISO 4400 |
| Coil Rating Code | G |
| Mechanical Options | None |
| Voltage & Frequency | 12 VDC |
| Compatible Fluids | Petroleum Oil |
| Design No. | 60 |
| Overrides | No Overrides |
| Reducer Module | N/A |
| Center Position | All Ports Open |
| Weight | 10.0 LB |
