Find a Service Center
- Solenoid Actuated Valve
- Pilot Operated Operation
- D08 NFPA Size
- Single Solenoid
- 2-Position Spring Offset Function
description
- DG5V-8 models are two-stage directional control valves having an integrally-mounted wet armature solenoid pilot valve. These valves are generally used to control the movement of a work cylinder or the rotation of a fluid motor.
caution
- Any sliding spool valve, if held for long periods of time, may stick and not spring return due to fluid residue formation and therefore should be cycled periodically to prevent this from happening
| Port Restrictor Plugs | None |
| Electrical Connection | No Connector |
| Valve Type | Standard-Duty |
| Coil Type | Flying Leads, 1/2 in NPT Thread Wiring Housing |
| Housing Code | W |
| Pressure Port Check Valve Code | None |
| Coil Rating Code | B |
| Performance | Standard Performance |
| Actuator Type | Solenoid |
| Tank Port Rating | 5000 |
| EN Code | None |
| Electrical Connector Code | None |
| Mounting | Subplate/Manifold Mount |
| Pressure [Max] | 5000 psi |
| Solenoid Energization Code | None |
| Manual Override Option Code | None |
| Actuation Identification | Solenoid B |
| Response Type Code | None |
| Solenoid | Single |
| Design No. | 10 |
| Pilot Valve Type Code | S |
| Manual Override | Plain Override |
| Leakage | Standard Performance |
| Spool Indicator Switch Code | None |
| Electrical Options | None |
| Reducer Module Code | None |
| Spool Control Modification Code | None |
| Operation | Pilot Operated |
| Solenoid Indicator Lights Code | None |
| Surge Suppressor/Damper Code | None |
| Pilot Valve Type | CETOP 3, Standard Performance |
| Gauge Port | SAE-4 |
| Port Restrictor Plug Code | None |
| Rated Flow [Max] | 175 gal/min |
| AC/DC | AC |
| Response Type | Standard Response |
| Overrides | Plain Override Solenoid Ends |
| Surge Suppressor/Damper | None |
| Mechanical Options | None |
| Crossover | All Ports Blocked |
| Reducer Module | No |
| Compatible Fluids | Petroleum Oil |
| Model No. | DG5V-8-S-2A-M-FW-B-10 |
| Mechanical Options Code | None |
| Pilot Pressure Code | None |
| Indicator Lights | No |
| Pressure Port Check Valve Pressure | N/A |
| Pilot Drain Code | None |
| Spool Spring Arrangement Code | A |
| NFPA Size | D08 |
| Body Material | Gray Iron |
| Spool Code | 2 |
| Gauge Ports Code | None |
| Voltage & Frequency | 110/120 VAC - 50/60 Hz |
| Spool Center Condition | B Port End |
| Center Position | All Ports Blocked |
| No. of Stages | Two Stage |
| Electrical Options Code | None |
| Fluid Cleanliness | 19/17/14 micron |
| Coil Type Code | F |
| Seal Material | Buna-N |
| Pilot/Drain | External Pilot/Internal Drain |
| Port T Pressure Rating | 5000 psi |
| Gauge Port Thread Type | 7/16 - 20 UNF, SAE Thread |
| Function | 2-Position Spring Offset |
| Weight | 35.0 LB |
