Find a Service Center
- Solenoid Actuated Valve
- Solenoid Operated Operation
- D05 NFPA Size
- Single Solenoid
- 2-Position Spring Offset Function
description
- DGS4S models are direct solenoid operated directional control valves. Their primary function in a hydraulic circuit is to direct fluid flow to a work cylinder or to control the direction of rotation of a hydraulic motor.
- Port connections are made by mounting the valve on a manifold or subplate containing the interface.
- Electrical connections to the valve are made in an electrical wiring housing or by various plug-in devices. A ground terminal is provided.
caution
- Any sliding spool valve, if held for long periods of time, may stick and not spring return due to fluid residue formation and therefore should be cycled periodically to prevent this from happening
| Pressure [Max] | 9000 psi |
| Cycle Rate [Max] | N/A |
| Surge Suppressor/Damper | None |
| Reducer Module | N/A |
| Crossover | All Ports Blocked |
| Mechanical Options | None |
| Electrical Connection | Connector Fitted w/ Lights |
| Port T Pressure Rating | 1000 psi |
| Response Type | Standard Response |
| Flow Direction Code | 4 |
| Indicator Lights | No |
| Port Restrictor Plugs | None |
| Actuator Type | Solenoid |
| Electrical Options Code | None |
| Operation | Solenoid Operated |
| Mechanical Options Code | None |
| Electrical Options | None |
| Pilot/Drain | None |
| Performance | Standard Performance |
| NFPA Size | D05 |
| Function | 2-Position Spring Offset |
| Actuation Identification | Solenoid B |
| Rated Flow [Max] | 24 gal/min |
| Coil Type | Connector Fitted w/Lights |
| No. of Stages | Single Stage |
| Mounting | Subplate/Manifold Mount |
| Body Material | Gray Iron |
| Tank Port Rating | 1000 |
| Temperature Range [Max] | 122 °F |
| Leakage | Standard Performance |
| AC/DC | DC |
| Coil Type Code | U6 |
| Valve Type | Standard-Duty |
| Compatible Fluids | Petroleum Oil |
| Spool Code | 2 |
| Pressure Port Check Valve Pressure | N/A |
| Pilot Valve Type | N/A |
| Coil Rating Code | H |
| Spool Spring Arrangement Code | A |
| Response Time | 50 to 60 ms |
| Watt Rating | 30 W |
| Seal Material | Buna-N |
| Solenoid | Single |
| Fluid Cleanliness | 19/17/14 micron |
| Manual Override | Plain Override |
| Model No. | DG4S4-012A-U6-H-60 |
| Temperature Range [Min] | 68 °F |
| Voltage & Frequency | 24 VDC |
| Center Position | All Ports Blocked |
| Overrides | No Overrides |
| Design No. | 60 |
| Weight | 10.0 LB |
