These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Mechanical Options
None
Pressure Port Check Valve Pressure
N/A
Center Position
All Ports Blocked
Reducer Module
N/A
Port T Code
7
Housing Code
None
Valve Type
High-Performance
Electrical Connector Code
None
Indicator Lights
No
Rated Flow [Max]
21 gal/min
Voltage & Frequency
24 VDC
Seal Material
Buna-N
Cycle Rate [Max]
N/A
Solenoid Indicator Lights Code
None
AC/DC
DC
Operation
Solenoid Operated
Pilot/Drain
None
Surge Suppressor/Damper Code
None
Actuator Type
Solenoid
Pilot Valve Type
N/A
Crossover
All Ports Blocked
Port T Pressure Rating
3000 psi
Coil Type
DIN 43650
Manual Override Option Code
Z
Spool Spring Arrangement Code
C
Coil Rating Code
H
Spool Shift Timing
N/A
Coil Type Code
U
Electrical Options
None
Response Type
Standard Response
Pressure [Max]
5075 psi
Spool Code
2
NFPA Size
D03
Function
3-Position Spring Centered
Surge Suppressor/Damper
None
Solenoid
Double
EN Code
None
Solenoid Energization Code
None
Port Restrictor Plugs
None
Function Code
2
Spool Indicator Switch Code
None
Electrical Connection
DIN 43650
Overrides
No Overrides
Design No.
60
Solenoid Code
H
Port Restrictor Plug Code
None
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
