
- Solenoid Actuated Valve
- Solenoid Operated Operation
- D05 NFPA Size
- Double Solenoid
- 3-Position Spring Centered Function
description
- DGS4S models are direct solenoid operated directional control valves. Their primary function in a hydraulic circuit is to direct fluid flow to a work cylinder or to control the direction of rotation of a hydraulic motor.
- Port connections are made by mounting the valve on a manifold or subplate containing the interface.
- Electrical connections to the valve are made in an electrical wiring housing or by various plug-in devices. A ground terminal is provided.
caution
- Any sliding spool valve, if held for long periods of time, may stick and not spring return due to fluid residue formation and therefore should be cycled periodically to prevent this from happening
Mechanical Options Code | None |
Pressure [Max] | 4500 psi |
Cycle Rate [Max] | N/A |
No. of Stages | Single Stage |
Mounting | Subplate/Manifold Mount |
Design No. | 60 |
Coil Type | Flying Leads |
Pilot Valve Type | N/A |
Spool Code | 0 |
Valve Type | Standard-Duty |
Pilot/Drain | None |
Model No. | DG4S4-010C-D-60 |
Rated Flow [Max] | 24 gal/min |
Tank Port Rating | 1000 |
Coil Rating Code | D |
Fluid Cleanliness | 19/17/14 micron |
Indicator Lights | No |
Surge Suppressor/Damper | None |
Spool Spring Arrangement Code | C |
Flow Direction Code | 4 |
Mechanical Options | None |
Function | 3-Position Spring Centered |
Port T Pressure Rating | 1000 psi |
Overrides | No Overrides |
NFPA Size | D05 |
Response Time | 20 to 40 ms |
Operation | Solenoid Operated |
Leakage | Standard Performance |
Actuator Type | Solenoid |
Pressure Port Check Valve Pressure | N/A |
AC/DC | AC |
Temperature Range [Max] | 122 °F |
Performance | Standard Performance |
Voltage & Frequency | 220/240 VAC - 50/60 Hz |
Temperature Range [Min] | 68 °F |
Center Position | All Ports Open |
Port Restrictor Plugs | None |
Electrical Options Code | None |
Body Material | Gray Iron |
Electrical Options | None |
Solenoid | Double |
Compatible Fluids | Petroleum Oil |
Seal Material | Buna-N |
Coil Type Code | None |
Reducer Module | N/A |
Electrical Connection | Lead Wires w/o Terminal Box |
Manual Override | Plain Override |
Actuation Identification | Solenoid A, Solenoid B |
Crossover | All Ports Open |
Response Type | Standard Response |
Weight | 10.0 LB |
