These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Overrides
No Overrides
Spool Indicator Switch Code
None
Electrical Options
None
AC/DC
DC
Electrical Connection
DIN 43650
Design No.
60
NFPA Size
D03
Function Code
6
Coil Type Code
U
Solenoid Energization Code
None
Pilot/Drain
None
Port T Pressure Rating
3000 psi
Spool Spring Arrangement Code
N
Mechanical Options
None
EN Code
None
Pilot Valve Type
N/A
Pressure Port Check Valve Pressure
N/A
Solenoid Indicator Lights Code
None
Operation
Solenoid Operated
Coil Type
DIN 43650
Response Type
Standard Response
Surge Suppressor/Damper Code
None
Indicator Lights
No
Crossover
P Blocked, A or B to T
Pressure [Max]
5075 psi
Electrical Connector Code
None
Housing Code
None
Rated Flow [Max]
21 gal/min
Manual Override Option Code
H
Solenoid Code
G
Coil Rating Code
G
Actuator Type
Solenoid
Surge Suppressor/Damper
None
Cycle Rate [Max]
N/A
Port Restrictor Plugs
None
Spool Shift Timing
N/A
Spool Code
6
Reducer Module
N/A
Port Restrictor Plug Code
None
Voltage & Frequency
12 VDC
Function
3-Position Detented
Solenoid
Double
Center Position
P Blocked, A & B to T
Valve Type
High-Performance
Port T Code
7
Seal Material
Buna-N
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
