These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Pressure [Max]
5075 psi
Response Type
Standard Response
Mechanical Options
None
Coil Rating Code
B
Pilot Valve Type
N/A
Electrical Connector Code
T
NFPA Size
D03
Pressure Port Check Valve Pressure
N/A
Solenoid Indicator Lights Code
L
Coil Type Code
F
AC/DC
AC
EN Code
None
Indicator Lights
Yes
Function Code
2
Port Restrictor Plug Code
None
Center Position
All Ports Blocked
Cycle Rate [Max]
N/A
Valve Type
High-Performance
Voltage & Frequency
110/120 VAC – 50/60 Hz
Solenoid Code
B
Housing Code
W
Design No.
60
Rated Flow [Max]
21 gal/min
Solenoid
Single
Spool Code
2
Operation
Solenoid Operated
Overrides
No Overrides
Solenoid Energization Code
None
Spool Indicator Switch Code
S5
Pilot/Drain
None
Port Restrictor Plugs
None
Electrical Connection
Wired Terminal Block
Coil Type
Flying Leads, 1/2 NPT Thread Wiring Housing
Spool Spring Arrangement Code
A
Reducer Module
N/A
Surge Suppressor/Damper Code
None
Surge Suppressor/Damper
None
Electrical Options
None
Function
2-Position Spring Offset, End to End
Crossover
All Ports Blocked
Port T Code
2
Port T Pressure Rating
150 psi
Seal Material
Buna-N
Actuator Type
Solenoid
Spool Shift Timing
N/A
Manual Override Option Code
None
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back