Find a Service Center
- Pressure Control Valve
- Pressure Relief Valve Type
- RV1-10 Series
- Cartridge Only Port Size
- Cartridge Only Port Type
caution
- Any sliding spool valve, if held for long periods of time, may stick and not spring return due to fluid residue formation and therefore should be cycled periodically to prevent this from happening
| Manufacturer Part No. | RV1-10-F-0-36/18 |
| Seal Material | Buna-N |
| Operating Pressure [Min] | 493 psi |
| Seal Kit Viton | 566086 |
| No. of Housing Ports | 2 |
| Pressure [Max] | 3046 psi |
| Operating Pressure [Max] | 3046 psi |
| Flow [Max] | 8 gal/min |
| Leakage | 0.25 cc/min |
| Adjustment Type | Factory Set |
| Valve Torque into Cavity | 47 to 54 Nm |
| Installation | Screw-in Cartridge |
| Cracking Pressure [Min] | 500 psi |
| Series | RV1-10 |
| Valve Material | Cartridge only |
| Port Size | Cartridge Only |
| Body Type | 1 |
| Pilot Ratio | 100:1 |
| Model No. | RV1-10-F-0-30/18 |
| Temperature Range [Max] | 248 °F |
| Housing Material | Cartridge Only |
| Operation | Direct Acting |
| No. of Valve Ports | 2 |
| Recommend Filtration Level | 18/16/13 microns |
| Style | Poppet |
| Pressure Setting | 1769 psi |
| Cracking Pressure [Max] | 3600 psi |
| Cavity | C-10-2 |
| Type | Pressure Relief Valve |
| Temperature Range [Min] | -40 °F |
| Seal Kit Buna | 565803 |
| Port Type | Cartridge Only |
| Weight | 0.48 LB |
