Find a Service Center
- PSV8-10 Series Pressure Sequence Valve
- Direct Acting, External Pilot, External Drain, Normally Open
- C-10-4 Cavity
- Buna-N Seals
- Screw Adjustment
caution
- Any sliding spool valve, if held for long periods of time, may stick and not spring return due to fluid residue formation and therefore should be cycled periodically to prevent this from happening
| Series | PSV8-10 |
| Pressure [Max] | 3000 psi |
| Adjustment Type | Screw |
| Seal Kit Viton | 566080 |
| Operation | Direct Acting, External Pilot, External Drain, Normally Open |
| Sequence Pressure [Min] | 100 psi |
| Manufacturer Part No. | PSV8-10-S-0-6/ |
| Pressure Setting | 350 psi |
| Housing Material | Cartridge Only |
| Flow [Max] | 6 gal/min |
| Type | Pressure Sequence Valve |
| Port Size | Cartridge Only |
| Seal Kit Buna | 889625 |
| Seal Material | Buna-N |
| Cavity | C-10-4 |
| Sequence Pressure [Max] | 600 psi |
| Model No. | PSV8-10-S-0-6/ |
| Weight | 0.6 LB |
