These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Voltage & Frequency
220 VAC – 50 Hz
Surge Suppressor/Damper Code
None
Valve Type
High-Performance
Reducer Module
N/A
Crossover
All Ports Open
Coil Type
DIN 43650
Manual Override Option Code
None
Rated Flow [Max]
21 gal/min
EN Code
None
Actuator Type
Solenoid
NFPA Size
D03
Pilot/Drain
None
Indicator Lights
No
Design No.
60
Function Code
0
Overrides
No Overrides
Spool Indicator Switch Code
None
Operation
Solenoid Operated
Seal Material
Buna-N
Mechanical Options
None
Solenoid Indicator Lights Code
None
Coil Rating Code
C
Electrical Connection
DIN 43650
Surge Suppressor/Damper
None
Cycle Rate [Max]
N/A
Spool Code
0
Port T Code
6
Solenoid Energization Code
V
Spool Spring Arrangement Code
C
Housing Code
None
Electrical Options
None
Port Restrictor Plugs
None
Response Type
Standard Response
Electrical Connector Code
None
Port T Pressure Rating
3000 psi
AC/DC
AC
Spool Shift Timing
N/A
Solenoid
Double
Center Position
All Ports Open
Pressure Port Check Valve Pressure
N/A
Solenoid Code
C
Function
3-Position Spring Centered
Pilot Valve Type
N/A
Port Restrictor Plug Code
None
Pressure [Max]
5075 psi
Coil Type Code
U
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
