These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Cycle Rate [Max]
N/A
Seal Material
Buna-N
Pressure Port Check Valve Pressure
N/A
Solenoid Indicator Lights Code
None
Coil Type
DIN 43650
Solenoid
Single
Mechanical Options
None
Reducer Module
N/A
Pressure [Max]
5075 psi
Surge Suppressor/Damper Code
None
Pilot/Drain
None
Pilot Valve Type
N/A
Rated Flow [Max]
21 gal/min
Manual Override Option Code
H
Voltage & Frequency
24 VDC
Housing Code
None
Spool Shift Timing
N/A
Solenoid Code
H
Electrical Connection
DIN 43650
Indicator Lights
No
Port Restrictor Plug Code
None
Electrical Options
None
Center Position
All Ports Open
Port T Pressure Rating
3000 psi
EN Code
None
Spool Spring Arrangement Code
B
Coil Rating Code
H
Spool Indicator Switch Code
None
Spool Code
0
Coil Type Code
U
NFPA Size
D03
Function Code
0
Operation
Solenoid Operated
Surge Suppressor/Damper
None
Function
2-Position Spring Offset, End to Center
Port Restrictor Plugs
None
Response Type
Standard Response
Overrides
No Overrides
Crossover
All Ports Open
AC/DC
DC
Valve Type
High-Performance
Actuator Type
Solenoid
Electrical Connector Code
None
Port T Code
7
Solenoid Energization Code
None
Design No.
60
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
