These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Multi-fluid capability without the need to change seals
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Coil Rating Code
B
Mechanical Options
None
Coil Type Code
F
Function
2-Position Spring Offset, End to Center
Port T Pressure Rating
3000 psi
Spool Shift Timing
N/A
Port Restrictor Plugs
None
Actuator Type
Solenoid
Housing Code
W
Voltage & Frequency
110/120 VAC – 50/60 Hz
Pilot/Drain
None
EN Code
None
Solenoid Indicator Lights Code
None
Port Restrictor Plug Code
None
Reducer Module
N/A
Pressure Port Check Valve Pressure
N/A
Valve Type
High-Performance
AC/DC
AC
Electrical Options
None
Cycle Rate [Max]
N/A
Spool Code
0
Overrides
No Overrides
Rated Flow [Max]
21 gal/min
Electrical Connector Code
None
Seal Material
Buna-N
Solenoid Code
B
Center Position
All Ports Open
Spool Spring Arrangement Code
B
Solenoid Energization Code
None
Manual Override Option Code
None
Port T Code
6
Surge Suppressor/Damper Code
None
Coil Type
Flying Leads, 1/2 NPT Thread Wiring Housing
Indicator Lights
No
Pilot Valve Type
N/A
NFPA Size
D03
Design No.
60
Function Code
0
Operation
Solenoid Operated
Spool Indicator Switch Code
None
Electrical Connection
No Connector
Crossover
All Ports Open
Pressure [Max]
5075 psi
Response Type
Standard Response
Surge Suppressor/Damper
None
Solenoid
Single
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back