These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Pilot Valve Type
N/A
Electrical Connection
DIN 43650
Function Code
6
Solenoid
Single
Reducer Module
N/A
Pressure Port Check Valve Pressure
N/A
Spool Shift Timing
N/A
Port Restrictor Plug Code
None
Surge Suppressor/Damper
None
Port T Pressure Rating
3000 psi
Rated Flow [Max]
21 gal/min
Spool Spring Arrangement Code
B
Function
2-Position Spring Offset, End to Center
Seal Material
Buna-N
Solenoid Energization Code
None
NFPA Size
D03
Response Type
Standard Response
Crossover
P Blocked, A or B to T
Solenoid Indicator Lights Code
None
Spool Code
6
EN Code
None
Coil Type
DIN 43650
Operation
Solenoid Operated
Cycle Rate [Max]
N/A
AC/DC
AC
Port T Code
6
Electrical Connector Code
None
Valve Type
High-Performance
Coil Type Code
U
Manual Override Option Code
None
Surge Suppressor/Damper Code
None
Overrides
No Overrides
Electrical Options
None
Port Restrictor Plugs
None
Housing Code
None
Solenoid Code
A
Pilot/Drain
None
Coil Rating Code
A
Design No.
60
Mechanical Options
None
Voltage & Frequency
110 VAC – 50 Hz
Center Position
P Blocked, A & B to T
Spool Indicator Switch Code
None
Indicator Lights
No
Pressure [Max]
5075 psi
Actuator Type
Solenoid
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
