Find a Service Center
- D05 Single Relief Valve
- Pressure Limited in Pressure Port
- Drained into Tank Port
- 60-1,450 psi
- Screw w/Locknut Adjustment
description
- Relief valves limit the maximum pressure in a system. These are mainly used to prevent high pressures from damaging system components and provide a path to reservoir. When these valves are used with a pressure-compensated pump, the pressure should be set approximately 10% higher than the pump compensator. Cross port relief valves are mainly used in motor circuits to prevent over pressurization. Sequence valves allow fluid to pass once the inlet pressure to the valve reaches the preset pressure. Pressure-reducing valves only allow pressure to pass up to the preset level. These valves are ideal to reduce the pressure in a particular circuit requiring a lower pressure.
includes
- Have all the internal passages necessary to serve the directional valve topping them
- Mounting surfaces and port patterns are international standards
compliances
- 0
| External Drain, Dual | N/A |
| Relief Function | Single |
| Adjustment Type | Screw w/ Locknut |
| Manufacturer Part No. | DGMC-5-PT-BW-S-30 |
| Operating Pressure [Max] | 4500 psi |
| External Drain | No |
| Family Name | Vickers D05 SystemStak™ Valves |
| Flow [Max] | 32 gal/min |
| Design No. | 30 |
| Pressure Limited In | Pressure Port |
| Port Drained Into | Tank Port |
| Model No. | DGMC-5-PT-BW-S-30 |
| Remote Control Port | No |
| Port Drained Into, Dual | N/A |
| Pressure Limited In, Dual | N/A |
| Adjustment Type, Dual | N/A |
| Pressure Adjustment Range (psi) | 60 to 1,450 |
| Valve Type | Relief Valve "P" to "T" |
| Interface | D05 |
| Gage Port | SAE-4 |
| Pressure Adjustment Range, Dual (psi) | N/A |
| Weight | 6.5 LB |
