These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Solenoid Energization Code
None
Port Restrictor Plug Code
None
Valve Type
High-Performance
Indicator Lights
No
Pressure Port Check Valve Pressure
N/A
Solenoid
Single
Operation
Solenoid Operated
Overrides
No Overrides
Solenoid Code
B
Function Code
2
AC/DC
AC
Electrical Connector Code
None
Pilot Valve Type
N/A
Surge Suppressor/Damper Code
None
EN Code
None
Electrical Connection
DIN 43650
Pilot/Drain
None
Port T Code
6
Reducer Module
N/A
Actuator Type
Solenoid
Function
2-Position Spring Offset, End to Center
Crossover
All Ports Blocked
Spool Spring Arrangement Code
B
Port T Pressure Rating
3000 psi
Response Type
Standard Response
Housing Code
None
Port Restrictor Plugs
None
Design No.
60
Surge Suppressor/Damper
None
Cycle Rate [Max]
N/A
Mechanical Options
None
Spool Shift Timing
N/A
Manual Override Option Code
None
Pressure [Max]
5075 psi
Voltage & Frequency
110/120 VAC – 50/60 Hz
Electrical Options
None
Seal Material
Buna-N
Rated Flow [Max]
21 gal/min
Coil Type Code
U
Coil Rating Code
B
Spool Indicator Switch Code
None
Solenoid Indicator Lights Code
None
NFPA Size
D03
Center Position
All Ports Blocked
Coil Type
DIN 43650
Spool Code
2
Weight
1.0 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
