Find a Service Center
- Pressure Control Valve
- Pressure Sequence Valve Type
- PSV10-10 Series
- Cartridge Only Port Size
- Cartridge Only Port Type
caution
- Any sliding spool valve, if held for long periods of time, may stick and not spring return due to fluid residue formation and therefore should be cycled periodically to prevent this from happening
| Pressure Setting | 1400 psi |
| Valve Material | Cartridge only |
| Housing Material | Cartridge Only |
| Installation | Screw-in Cartridge |
| Recommend Filtration Level | 18/16/13 microns |
| Seal Kit Viton | 566080 |
| Temperature Range [Min] | -40 °F |
| Type | Pressure Sequence Valve |
| Seal Material | Buna-N |
| Sequence Pressure [Min] | 400 psi |
| Adjustment Type | Screw |
| Operation | Direct Acting |
| Pressure [Max] | 3046 psi |
| Sequence Pressure [Max] | 2400 psi |
| Flow [Max] | 6 gal/min |
| Temperature Range [Max] | 248 °F |
| Series | PSV10-10 |
| Style | Spool |
| Operating Pressure [Min] | 406 psi |
| Cavity | C-10-4 |
| Pilot Ratio | 100:1 |
| No. of Housing Ports | 4 |
| Port Size | Cartridge Only |
| Model No. | PSV10-10-S-0-24/ |
| Seal Kit Buna | 889625 |
| Operating Pressure [Max] | 3046 psi |
| Port Type | Cartridge Only |
| No. of Valve Ports | 4 |
| Manufacturer Part No. | PSV10-10-S-0-24 |
| Valve Torque into Cavity | 47 to 54 Nm |
| Weight | 0.6 LB |
