- Solenoid Actuated Valve
- Solenoid Operated Operation
- D05 NFPA Size
- Double Solenoid
- 3-Position Spring Centered Function
description
- DGS4S models are direct solenoid operated directional control valves. Their primary function in a hydraulic circuit is to direct fluid flow to a work cylinder or to control the direction of rotation of a hydraulic motor.
- Port connections are made by mounting the valve on a manifold or subplate containing the interface.
- Electrical connections to the valve are made in an electrical wiring housing or by various plug-in devices. A ground terminal is provided.
caution
- Any sliding spool valve, if held for long periods of time, may stick and not spring return due to fluid residue formation and therefore should be cycled periodically to prevent this from happening
| Seal Material | Buna-N |
| Rated Flow [Max] | 24 gal/min |
| Flow Direction Code | 4 |
| Reducer Module | N/A |
| Tank Port Rating | 1000 |
| AC/DC | AC |
| Spool Code | 6 |
| Valve Type | Standard-Duty |
| No. of Stages | Single Stage |
| Temperature Range [Min] | 68 °F |
| Operation | Solenoid Operated |
| Actuator Type | Solenoid |
| Overrides | No Overrides |
| Mechanical Options | None |
| Temperature Range [Max] | 122 °F |
| Cycle Rate [Max] | N/A |
| Response Type | Standard Response |
| Design No. | 50 |
| Model No. | DG4S4W-016C-50 |
| Mechanical Options Code | None |
| Indicator Lights | Yes |
| Manual Override | Plain Override |
| Actuation Identification | Solenoid A, Solenoid B |
| Coil Type | No Coil |
| Port Restrictor Plugs | None |
| Coil Rating Code | None |
| Port T Pressure Rating | 1000 psi |
| Electrical Options | None |
| Pressure [Max] | 11500 psi |
| Electrical Connection | Lead Wires w/ Terminal Box |
| Center Position | P Blocked, A & B to T |
| Performance | Standard Performance |
| Electrical Options Code | W |
| Pilot Valve Type | N/A |
| Solenoid Air Gap Code | None |
| Pressure Port Check Valve Pressure | N/A |
| Function | 3-Position Spring Centered |
| Solenoid | Double |
| Compatible Fluids | Petroleum Oil |
| Leakage | Standard Performance |
| Surge Suppressor/Damper | None |
| Crossover | P Blocked, A or B to T |
| Fluid Cleanliness | 19/17/14 micron |
| Body Material | Gray Iron |
| Spool Spring Arrangement Code | C |
| Mounting | Subplate/Manifold Mount |
| Pilot/Drain | None |
| NFPA Size | D05 |
| Voltage & Frequency | 115 VAC - 60 Hz |
| Weight | 10.0 LB |

