
- Solenoid Actuated Valve
- Solenoid Operated Operation
- D05 NFPA Size
- Double Solenoid
- 3-Position Spring Centered Function
description
- DGS4S models are direct solenoid operated directional control valves. Their primary function in a hydraulic circuit is to direct fluid flow to a work cylinder or to control the direction of rotation of a hydraulic motor.
- Port connections are made by mounting the valve on a manifold or subplate containing the interface.
- Electrical connections to the valve are made in an electrical wiring housing or by various plug-in devices. A ground terminal is provided.
caution
- Any sliding spool valve, if held for long periods of time, may stick and not spring return due to fluid residue formation and therefore should be cycled periodically to prevent this from happening
Crossover | P Blocked, A or B to T |
Response Type | Standard Response |
Electrical Options | None |
Performance | Standard Performance |
Design No. | 50 |
Reducer Module | N/A |
Pilot Valve Type | N/A |
Mounting | Subplate/Manifold Mount |
Overrides | No Overrides |
Indicator Lights | Yes |
Temperature Range [Min] | 68 °F |
Port T Pressure Rating | 1000 psi |
Actuator Type | Solenoid |
Flow Direction Code | 4 |
Leakage | Standard Performance |
NFPA Size | D05 |
Coil Type | No Coil |
Body Material | Gray Iron |
Pressure Port Check Valve Pressure | N/A |
No. of Stages | Single Stage |
Coil Rating Code | None |
Compatible Fluids | Petroleum Oil |
Center Position | P Blocked, A & B to T |
Pressure [Max] | 11500 psi |
Voltage & Frequency | 115 VAC - 50/60 Hz |
Fluid Cleanliness | 19/17/14 micron |
Pilot/Drain | None |
Seal Material | Buna-N |
Electrical Connection | Ground Terminal |
Surge Suppressor/Damper | None |
AC/DC | AC |
Operation | Solenoid Operated |
Spool Code | 6 |
Mechanical Options Code | None |
Port Restrictor Plugs | None |
Tank Port Rating | 1000 |
Function | 3-Position Spring Centered |
Spool Spring Arrangement Code | C |
Electrical Options Code | L |
Solenoid | Double |
Rated Flow [Max] | 24 gal/min |
Temperature Range [Max] | 122 °F |
Actuation Identification | Solenoid A, Solenoid B |
Mechanical Options | None |
Solenoid Air Gap Code | None |
Manual Override | Plain Override |
Model No. | DG4S4L-016C-115AC-50/60-50 |
Valve Type | Standard-Duty |
Cycle Rate [Max] | N/A |
Weight | 10.0 LB |
