Find a Service Center
- Solenoid Actuated Valve
- Solenoid Operated Operation
- D05 NFPA Size
- Single Solenoid
- 2-Position Spring Offset Function
description
- DGS4S models are direct solenoid operated directional control valves. Their primary function in a hydraulic circuit is to direct fluid flow to a work cylinder or to control the direction of rotation of a hydraulic motor.
- Port connections are made by mounting the valve on a manifold or subplate containing the interface.
- Electrical connections to the valve are made in an electrical wiring housing or by various plug-in devices. A ground terminal is provided.
caution
- Any sliding spool valve, if held for long periods of time, may stick and not spring return due to fluid residue formation and therefore should be cycled periodically to prevent this from happening
| Seal Material | Buna-N |
| Coil Type | No Coil |
| Operation | Solenoid Operated |
| Pilot Valve Type | N/A |
| Mechanical Options Code | None |
| Indicator Lights | No |
| Electrical Options Code | None |
| Solenoid Air Gap Code | None |
| Center Position | All Ports Blocked |
| Port T Pressure Rating | 1000 psi |
| Valve Type | Standard-Duty |
| Pressure Port Check Valve Pressure | N/A |
| No. of Stages | Single Stage |
| Actuator Type | Solenoid |
| Temperature Range [Max] | 122 °F |
| Overrides | No Overrides |
| Leakage | Standard Performance |
| Design No. | 50 |
| AC/DC | AC |
| Rated Flow [Max] | 24 gal/min |
| Actuation Identification | Solenoid B |
| Model No. | DG4S4-012A-115AC-50/60-50 |
| Spool Spring Arrangement Code | A |
| Solenoid | Single |
| Function | 2-Position Spring Offset |
| Mounting | Subplate/Manifold Mount |
| Performance | Standard Performance |
| Electrical Options | None |
| Spool Code | 2 |
| Mechanical Options | None |
| Compatible Fluids | Petroleum Oil |
| Electrical Connection | Ground Terminal |
| Port Restrictor Plugs | None |
| Surge Suppressor/Damper | None |
| Coil Rating Code | None |
| Pilot/Drain | None |
| Temperature Range [Min] | 68 °F |
| Voltage & Frequency | 115 VAC - 50/60 Hz |
| Response Type | Standard Response |
| Flow Direction Code | 4 |
| Fluid Cleanliness | 19/17/14 micron |
| Tank Port Rating | 1000 |
| Pressure [Max] | 11500 psi |
| Reducer Module | N/A |
| Body Material | Gray Iron |
| Crossover | All Ports Blocked |
| Manual Override | Plain Override |
| Cycle Rate [Max] | N/A |
| NFPA Size | D05 |
| Weight | 10.0 LB |
