Find a Service Center
- Single Unit Vane Pumps - Fixed Displacement
- V10 Pump Series
- Right Hand (CW) Rotation
- Straight w/ Key Shaft Type
description
- The field-proven Eaton fixed displacement vane pump is a common first choice for low- to medium-pressure mobile and industrial applications all over the world. Available with integrated flow control valves to simplify system design and installation, these pumps are not only widely used as pilot and auxiliary pumps for complex systems, but also the de facto standard for heavy-duty trucks and interstate buses.
features
- Rated flow capacities of 1 to 7 gpm for V10 series and 6 to 13 gpm for V20 series
- Pump rotation, port orientation and cartridge kit are field changeable
- SAE 'A' two-bolt mounting flanges are standard
- Designed for use with oil or synthetic fire-resistant fluids
- foot mounting brackets optional
- Pressure-balanced, modular design reduces noise, extends life and improves serviceability
| Model No. | V10 1P5P 1C20 |
| Design No. | 20 |
| Mounting Flange Code | 1 |
| Pump Series | V10 |
| Inlet Port Code | P |
| Rotation | Right Hand (CW) |
| Shaft Type | Straight w/ Key |
| Flow @ RPM | 5 gpm @ 1200 rpm |
| Pressure Port | 1/2 in NPT |
| Shaft Seal Type | Single Shaft Seal |
| Outlet Port Position | Inline w/ Inlet |
| Flow Rate | 5 gal/min @ 1200 rpm |
| Seal Material | Buna-N |
| Shaft Key | 3/16 in |
| Pressure [Max] | 2500 psi |
| Shaft Code + Outlet Port Code | 1C |
| Port Size | 1 |
| Port Type | NPT |
| Pressure Port Code | P |
| GPM @ Speed | 7.5 gpm @ 1800 rpm |
| Integral Valve Configuration | w/o Integral Valves |
| Mounting | Flange Mount |
| Mounting Flange | SAE A, 2 Bolt |
| Displacement (in³/rev) | 1 |
| Shaft Length | 1 3/4 in |
| Shaft Dia. | 0.75 in |
| Configuration | Single |
| Weight | 11.25 LB |
