Find a Service Center
- D05 Double Solenoid Operated Valve
- 115 VAC - 60 Hz
- Ground Terminal
- No Coil
- 3-Position Detented
description
- DGS4S models are direct solenoid operated directional control valves. Their primary function in a hydraulic circuit is to direct fluid flow to a work cylinder or to control the direction of rotation of a hydraulic motor.
- Port connections are made by mounting the valve on a manifold or subplate containing the interface.
- Electrical connections to the valve are made in an electrical wiring housing or by various plug-in devices. A ground terminal is provided.
caution
- Any sliding spool valve, if held for long periods of time, may stick and not spring return due to fluid residue formation and therefore should be cycled periodically to prevent this from happening
| Overrides | No Overrides |
| Port T Pressure Rating | 1000 psi |
| Surge Suppressor/Damper | None |
| Pressure Port Check Valve Pressure | N/A |
| Cycle Rate [Max] | N/A |
| Electrical Options Code | L |
| AC/DC | AC |
| Solenoid Air Gap Code | None |
| Mechanical Options | None |
| Coil Type | No Coil |
| Pilot/Drain | None |
| Reducer Module | N/A |
| Function | 3-Position Detented |
| Electrical Options | None |
| Response Type | Standard Response |
| Spool Code | 2 |
| Voltage & Frequency | 115 VAC – 60 Hz |
| Mechanical Options Code | None |
| Electrical Connection | Ground Terminal |
| Operation | Solenoid Operated |
| Flow Direction Code | 4 |
| Rated Flow [Max] | 20 gal/min |
| Solenoid | Double |
| Center Position | All Ports Blocked |
| Indicator Lights | Yes |
| Design No. | 51 |
| Crossover | All Ports Blocked |
| Coil Rating Code | None |
| Pressure [Max] | 3000 psi |
| Pilot Valve Type | N/A |
| Port Restrictor Plugs | None |
| Valve Type | Standard-Duty |
| Spool Spring Arrangement Code | N |
| Seal Material | Buna-N |
| NFPA Size | D05 |
| Actuator Type | Solenoid |
| Weight | 10.0 LB |
