Find a Service Center
- D05 Double Solenoid Operated Valve
- 12 VDC
- Ground Terminal
- No Coil
- 3-Position Spring Centered
description
- DGS4S models are direct solenoid operated directional control valves. Their primary function in a hydraulic circuit is to direct fluid flow to a work cylinder or to control the direction of rotation of a hydraulic motor.
- Port connections are made by mounting the valve on a manifold or subplate containing the interface.
- Electrical connections to the valve are made in an electrical wiring housing or by various plug-in devices. A ground terminal is provided.
caution
- Any sliding spool valve, if held for long periods of time, may stick and not spring return due to fluid residue formation and therefore should be cycled periodically to prevent this from happening
| Response Type | Standard Response |
| AC/DC | DC |
| Port Restrictor Plugs | None |
| Actuator Type | Solenoid |
| Pressure Port Check Valve Pressure | N/A |
| Overrides | No Overrides |
| Electrical Options Code | None |
| Function | 3-Position Spring Centered |
| Pilot/Drain | None |
| Cycle Rate [Max] | N/A |
| NFPA Size | D05 |
| Valve Type | Standard-Duty |
| Seal Material | Buna-N |
| Design No. | 50 |
| Operation | Solenoid Operated |
| Coil Type | No Coil |
| Electrical Options | None |
| Center Position | P Blocked, A & B to T |
| Electrical Connection | Ground Terminal |
| Flow Direction Code | 4 |
| Indicator Lights | No |
| Mechanical Options Code | None |
| Reducer Module | N/A |
| Port T Pressure Rating | 1000 psi |
| Spool Spring Arrangement Code | C |
| Crossover | P Blocked, A or B to T |
| Surge Suppressor/Damper | None |
| Solenoid | Double |
| Spool Code | 6 |
| Pressure [Max] | 3000 psi |
| Pilot Valve Type | N/A |
| Mechanical Options | None |
| Voltage & Frequency | 12 VDC |
| Rated Flow [Max] | 20 gal/min |
| Coil Rating Code | None |
| Solenoid Air Gap Code | None |
| Weight | 10.0 LB |
