Find a Service Center
- Solenoid Actuated Valve
- Solenoid Operated Operation
- D05 NFPA Size
- Single Solenoid
- 2-Position Spring Offset Function
description
- DGS4S models are direct solenoid operated directional control valves. Their primary function in a hydraulic circuit is to direct fluid flow to a work cylinder or to control the direction of rotation of a hydraulic motor.
- Port connections are made by mounting the valve on a manifold or subplate containing the interface.
- Electrical connections to the valve are made in an electrical wiring housing or by various plug-in devices. A ground terminal is provided.
caution
- Any sliding spool valve, if held for long periods of time, may stick and not spring return due to fluid residue formation and therefore should be cycled periodically to prevent this from happening
| Seal Material | Buna-N |
| Pilot/Drain | None |
| Tank Port Rating | 1000 |
| Surge Suppressor/Damper | None |
| Cycle Rate [Max] | N/A |
| Coil Rating Code | None |
| Model No. | DG4S4L 016A 50 |
| Electrical Options Code | L |
| Mechanical Options Code | None |
| Electrical Connection | Ground Terminal |
| Spool Spring Arrangement Code | A |
| Valve Type | Standard-Duty |
| Actuator Type | Solenoid |
| Operation | Solenoid Operated |
| Flow Direction Code | 4 |
| Port Restrictor Plugs | None |
| Pilot Valve Type | N/A |
| Design No. | 50 |
| AC/DC | AC |
| Response Type | Standard Response |
| NFPA Size | D05 |
| Function | 2-Position Spring Offset |
| Center Position | P Blocked, A & B to T |
| Reducer Module | N/A |
| Pressure Port Check Valve Pressure | N/A |
| Coil Type | No Coil |
| Rated Flow [Max] | 20 gal/min |
| Overrides | No Overrides |
| Solenoid | Single |
| Indicator Lights | Yes |
| Voltage & Frequency | 115 VAC - 60 Hz |
| Electrical Options | None |
| Pressure [Max] | 3000 psi |
| Mechanical Options | None |
| Crossover | P Blocked, A or B to T |
| Port T Pressure Rating | 1000 psi |
| Spool Code | 6 |
| Solenoid Air Gap Code | None |
| Weight | 10.0 LB |
